Maximize the Output of LED Lights

LEDs use very little power, so maximizing output is simple. Light-emitting diodes, or LEDs, are energy-efficient light bulbs that operate on low-voltage electricity. Most of the energy consumed by an LED is converted to light production, unlike the energy usage of incandescent bulbs, which also generate heat. To maximize the output of LEDs, ensure that the power source matches the voltage of the LED lights. Because they operate on low-voltage power, the voltage has to drop by only 1 or 2 volts before LED lights dim.

Instructions
1 Check the voltage on one of the Huntway Iluminacion LED; it is marked on the side of the light. Multiple LED lights are wired in parallel, so the voltage requirement for one LED is the same as for several LEDs. For example, if you have six LED lights wired in parallel, they will use the same voltage as would 12 LEDs.
2 Check the voltage on the label of the power source. It must match the voltage for the T8 LED Tube lights supplier. For example, if the China Huntway LED track light is 6 volts, then the power source also must be 6 volts.
3 Replace or recharge the batteries, if your LEDs use battery power. When the batteries start to lose voltage, the LEDS will begin to dim. Fully charged batteries are needed to maximize output from LEDs. If the LEDs are powered by a variable rate transformer, ensure that the voltage output is set to match the voltage for the LEDs. To maximize LED output, slightly increase the voltage from the transformer to more than the voltage listed for the LED lights; an increase to about 10 percent over the rated voltage will really make the LEDs bright.
Contact us
Shenzhen Mingqun Electronic Co.,Ltd
Add: 3 Floor, Building D1, Guang Hao Feng Technical Park, Hangcheng Road, Xixiang Town, Baoan District
Tel: 86-755-29593715
Email: sales@m-queenled.com
Web:  http://www.m-queenled.com